Welch-allyn Ear Temperatures with the Braun ThermoScan PRO 400 User Manual download pdf

1. Remove the thermometer from the case and

attach a probe cover. The device will turn on.

2. Wait for the “ready” beep and place the

probe snugly into the ear canal; correct probe

placement is essential for accurate readings.

3. Press and release the Start button. The

thermometer will beep once. The green

ExacTemp

™

light above the Start button will

flash, indicating stable probe placement.

4. A long beep and a solid green ExacTemp light

will signal the end of the measurement.

5. If the probe is not placed in a stable position

while taking a temperature, the device beeps,

the green ExacTemp light goes out and POS

(Position Error) will display.

6. Press the button to recall the last

temperature.

7. To change default temperature scale: With

the device off, press and hold the button

for about 5 seconds. Release the button

when desired scale is shown.

Ear Temperatures

with the Braun ThermoScan® PRO 4000

37,3

36,9

36,6

34,5

1 2

1. Remove the thermometer from the case and attach a probe cover. The device will turn on.2. Wait for the “ready” beep and place the probe snugly

No comments

Welch-allyn Ear Temperatures with the Braun ThermoScan PRO 400 User Manual