Welch-allyn Cardioperfect PRO ECG Recorder - User Manual User Manual download pdf (Page 14)

CardioPerfect

PRO ECG Recorder - User Manual

DIR 80012763 Ver. F 14 / 26

2. Installation

Before using the system, the CardioPerfect Pro cardiograph needs to be connected to the

computer and the software must be properly configured.

Figure 1 Front view CardioPerfect Pro Cardiograph

Figure 1 is a front view of the CardioPerfect Pro. A description of the items indicated is given

in table 1.

Table 1 Description of CardioPerfect Pro Cardiograph front panel.

DESCRIPTION

EXPLANATION

Patent Cable Connection

Connection for the patient cable

Type BF Symbol

IEC symbol, type BF equipment, defibrillator proof

On/Off Switch

Manual switch to switch on cardiograph

LED

Power indicator, red indicates battery is low and needs to

be recharged immediately, green indicates that sufficient

battery power exists to record an ECG, no LED indicates

ECG recording is not possible.

PC Symbol

Input for computer cable

PC Interface Cable

Connection

Connection for the PC interface cable (Prolink)

Before you can start recording ECG’s with the CardioPerfect Pro cardiograph, you

need to:

1. Install the applicable software (refer to the Welch Allyn CardioPerfect Workstation

Installation User Manual)

2. Install the hardware, including the required drivers. (Please refer to the Rest manual

chapters 11 & 12 or Stress manual chapters 10 & 11)

3. Configure the software (Please refer to the Rest manual chapters 11 &12 or Stress

manual chapters 10 & 11)

Type BF Symbol

On/Off Switch

PC Symbol

PC Interface Cable Connection

Patient Cable Connection

LED

1 ... 13 14 15 ... 26

No comments

Welch-allyn Cardioperfect PRO ECG Recorder - User Manual User Manual Page 14