Welch Allyn SureTemp 679 Instruction Manual download pdf (Page 11)

3. During the temperature measurement cycle,

“walking” segments will appear on the

display indicating measurement is in pro-

cess.

4. When the final temperature has been

reached, a tone will sound and the patient’s

temperature will be displayed.

5. After the temperature measurement is com-

plete, remove the probe from the patient, then eject the probe cover by firmly

pressing the ejection button on the probe. (Figure 1)

6. Insert the probe into the storage channel to clear the display, in preparation

for another temperature.

USING MONITOR MODE

Remove the probe from the storage channel and take a temperature using Oral,

Rectal, or Axillary Mode. After the temperature is displayed, depress the Mode

button for more than 2 seconds. The “M” icon will appear on the LCD

indicating the unit is in Monitor mode. The unit is ready to continuously display

temperatures in Monitor mode. After the Monitor mode temperature has been

taken, replacing the probe in the storage channel clears the display and resets

the thermometer to Normal mode. The unit will automatically enter the Monitor

mode by removing the probe from the probe storage channel and waiting 60

seconds.

NOTE: When using the Monitor mode, allow the temperature readout

to stabilize for 3 minutes for oral and rectal temperatures and 5 minutes

for axillary temperatures.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

No comments

Welch Allyn SureTemp 679 Instruction Manual Page 11