Welch-allyn VSM6000 Connect RRA - Quick Reference Guide User Manual download pdf

Connect the SpO2/RRa dual cable

Note Monitors conﬁgured to measure RRa require a dual cable as shown.

The dual cable has two ports, one for the SpO2 cable and the other for the RRa cable.

1. Connect the dual cable to the device.

2. Connect the SpO2 cable to the red Pulse CO-Oximetry port.

3. Attach the RRa patient cable to the Acoustic Monitoring port.

See the dual cable manufacturer’s directions for use for more information.

Note Labels on the dual connector and the patient cables help ensure proper connection of the

patient cables to the dual cable.

4. Attach the single-use RRa patient sensor to the RRa patient cable.

Acoustic respiration rate (RRa)

Monitors conﬁgured with Masimo rainbow Acoustic Monitoring technology continuously and noninvasively measure respiration rate based on respiratory sounds produced in

the upper airway. Respiratory sounds are detected through a sensor applied to the patient’s neck.

Note RRa is available only in the Continuous Monitoring proﬁle.

Note Masimo SpO2 monitoring is required when monitoring RRa.

Note RRa monitoring is only for adult patients who weigh more than 66 pounds (30 kilograms).

1 2

Conﬁgure RRa alarms 2

Summary of Contents

Page 1

Connect the SpO2/RRa dual cableNote Monitors conﬁgured to measure RRa require a dual cable as shown. The dual cable has two ports, one for the S

Page 2 - Conﬁgure RRa alarms

RRa frame The Respiration Indicator displays the level of sound detected by the RRa sensor. A higher level of sound causes more bars to illumi

Comments to this Manuals

No comments

Welch-allyn VSM6000 Connect RRA - Quick Reference Guide User Manual

Browse online or download User Manual for Equipment Welch-allyn VSM6000 Connect RRA - Quick Reference Guide. Welch Allyn VSM6000 Connect RRA - Quick Reference Guide User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Equipment Welch-allyn VSM6000 Connect RRA - Quick Reference Guide