Welch-allyn Connex Vital Signs Monitor CO2 - Quick Reference G User Manual download pdf

Connect the sampling line to the monitor

1. On the left side of the monitor, slide up the door that covers the sampling

line port.

2. Connect the sampling line. Turn the connector to the right until tight.

(See the animation on the display.)

Note The CO2 pump starts as soon as the pump sensor recognizes the

sampling line. You must connect the sampling line correctly to

accurately monitor CO2.

3. Connect the sampling line to the patient as described in the directions for use

supplied with the sampling line.

4. Verify that you are using the Continuous Monitoring proﬁle.

Note If “Allow proﬁle change” is enabled in Advanced settings, the device

attempts to shift automatically to the Continuous Monitoring proﬁle when

you connect the sensor cable.

Stop and restart the CO2 pump

1. To temporarily pause or stop CO2 monitoring, touch in the

etCO2 frame.

2. To resume CO2 monitoring, touch

Set up etCO2

1. Touch the Settings tab.

2. Touch the Setup tab.

3. Touch the etCO2 vertical tab.

4. Adjust the following settings as desired:

• Sweep speed

• Wavefor m sc ale

• Pump standby time

5. Touch the Home tab.

IPI (Integrated Pulmonary Index)

IPI integrates four parameters (etCO2, RR, SpO2, and PR) and their interactions to

provide a numeric value indicating a patient’s overall respiratory status.

1. On the Home tab, touch the patient type control on the right side of the

Patient frame. The Patient Summary tab appears.

2. Touch the Type list box and select patient type.

Note IPI is available for adult patients as well as three groups of pediatric

patients (1–3 years, 3–6 years, and 6–12 years), but it is not available for

neonatal/infant patients. Pediatric patient subtypes appear on the

Patient Summary tab and on the Home tab as a label in the IPI frame, but

they do not appear in the Patient frame.

Note IPI is available only with the Continuous Monitoring proﬁle.

1 2

Summary of Contents

Page 1 - Set up etCO2

Connect the sampling line to the monitor1. On the left side of the monitor, slide up the door that covers the sampling line port.2. Connect the

Page 2 - Conﬁgure RR alarms

Conﬁgure RR alarms 1. Verify that you are using the Continuous Monitoring proﬁle. Note If “Allow proﬁle change” is enabled in Advanced settings, the

Welch-allyn Connex Vital Signs Monitor CO2 - Quick Reference G User Manual

Browse online or download User Manual for Equipment Welch-allyn Connex Vital Signs Monitor CO2 - Quick Reference G. Welch Allyn Connex Vital Signs Monitor CO2 - Quick Reference Guide User Manual

Summary of Contents

More documents for Equipment Welch Allyn Connex Vital Signs Monitor CO2 - Quick Reference G

Comments to this Manuals

Welch-allyn Connex Vital Signs Monitor CO2 - Quick Reference G User Manual

Browse online or download User Manual for Equipment Welch-allyn Connex Vital Signs Monitor CO2 - Quick Reference G. Welch Allyn Connex Vital Signs Monitor CO2 - Quick Reference Guide User Manual

Summary of Contents

More documents for Equipment Welch Allyn Connex Vital Signs Monitor CO2 - Quick Reference G

Comments to this Manuals

Related products and manuals for Equipment Welch-allyn Connex Vital Signs Monitor CO2 - Quick Reference G