Welch Allyn SCANTEAM 5770 LASER Specifications download pdf (Page 88)

4 - 4

Beeper Pitch

You may wish to set your beeper to a higher or lower pitch. This feature is helpful

if there are several scanners being used in close proximity. Different pitches

make it easier to distinguish which scanner is beeping.

Scanner Voting Selection

The scanner offers three levels of voting for decoded messages: off, normal, and

high. The greatest decoding speed is achieved by turning voting off. The

greatest level of security is achieved by selecting the high voting level. The high

voting level is the recommended setting when reading poor quality bar codes.

The normal voting level provides a balance of good decoding speed and security.

Regardless of voting level selection, the decoded message format and length

may be qualified before the message is transmitted. This will provide additional

security. If format and length requirements are not met, the message will not be

transmitted. Refer to Data Formatter Selections (page 4-15) to set format

requirements. Refer to Chapter 5 to set message length requirements, by

symbology.

Note: To maximize both decoding speed and security, it is recommended to

disable all symbologies that will not be used.

When voting is turned off, a bar code needs only to be read one time for a

decode.

Low

*Medium

Medium High

High

Off

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 199 200

No comments

Welch Allyn SCANTEAM 5770 LASER Specifications Page 88