Welch Allyn SCANTEAM 2380 WAND Specifications download pdf (Page 37)

4–13

Programming the Scanner

Intermec Capability§

Scanning the “Yes” bar code allows the 2380 to be compatible with the

Intermec keyboard function codes. Scanning the “No” bar code symbol

causes the 2380 default keyboard codes in the preamble and postamble to

remain active at all times. The default selection is “No.”

4.7 SCANCODE SELECTION Menu Page

This menu page is used to select K2 scancode capability, new keyboard

scancode table, beep PC, numeric keypad and RX interrupt. An

explanation of programmable selections follows.

K2 Scancode Compatibility

This selection only applies to customers using AT, XT, or PS/2’s. If this

selection is enabled (YES), the 2380 will use the same scancodes as the

Welch Allyn SCANTEAM 2300 (K2). If this selection is disabled, the

2380 will use the scancodes found in Appendix C. All other terminals use

K2 scancode tables which also appear in Appendix C.

New Keyboard Scancode Table

If the SCANTEAM 2380 has been downloaded to contain another

scancode table, programming this selection to “Yes” will cause the new

scancode table to be used, rather than the normal scancode table. This

menu selection is applicable for use with terminals not equipped with

standard manufacturer’s keyboards (that is, international keyboards).

Beep PC§

When this menu selection is enabled (YES), the 2380 will beep the PC on a

good read. This selection must be disabled (“No”) when “Beep on Reset”

(OUTPUT PARAMETERS) is enabled.

Note: The master DEFAULT bar code on this menu page does not return

this parameter to its default setting.

Numeric Keypad§

When “main keyboard numbers ” is selected, numbers will be sent to the

host terminal as if keyed in from the main keyboard. If “numeric keypad”

is enabled, numbers will be sent as if keyed in from the numeric keypad.

Note: The master DEFAULT bar code on this menu page does not return

this parameter to its default setting.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 67 68

No comments

Welch Allyn SCANTEAM 2380 WAND Specifications Page 37