Welch Allyn SCANTEAM 2380 WAND Specifications download pdf (Page 45)

5–3

Maintenance and Troubleshooting

6) Check the condition of the scanner tip. If the tip is scratched, the

scanner may not read properly. If the tip is broken or cracked, the

optics may also become damaged by dust or other foreign matter.

Should either of these conditions be present, replace the scanner tip.

The tip can be removed by inserting a thin coin into the tip locking ring

and prying it off the end of the scanner.

Do not touch or make contact with the exposed lens surface as permanent

damage to the scanner optics may result.

Welch Allyn recommends keeping a supply of spare tips on hand. If

replacing the tip does not correct the scanning problem, it may be

necessary to replace the entire wand unit.

Note: Other than the replaceable tip, the wand scanner contains no user

serviceable parts and, therefore, the scanner case should not be

opened.

Opening the scanner voids the warranty.

If proper wand operation cannot be obtained after performing these checks,

factory service may be required.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 67 68

No comments

Welch Allyn SCANTEAM 2380 WAND Specifications Page 45